Table of Contents
Advertisement
Controlling the Projector via Scheduling
Date/Time Settings
The Date/Tme settng can be adjusted va a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) E nter [https://192.168.1.10] nto the address bar of the web browser.
Enter the Admnstrator ID and Password and clck [Logon].
2) C lck [Date/Time Settings] on the main menu and configure each item. Refer
to the [Date/Time Settings] tem n [Configuring and Controlling the Pro-
jector via a Web Browser] for further nformaton.
3) Clck the [Apply] button to save the settngs.
NOTE
• A Network Restart s requred after the Daylght Savngs Tme or
SNTP configuration settings have been changed.
• The battery for the bult n clock may be dead f the clock loses tme even
when the DATE and TIME have been set correctly. Replace the battery by fol-
lowng the nstructons on replacng the battery.
• The Internal Clock's tme may not reman accurate. Usng SNTP s recom-
mended to mantan accurate tme.
ViewSonic
PJ1158
84
Advertisement
Table of Contents
