Network Settings - ViewSonic PJ1158 User Manual

Settings

Network Settings

Displays and configures network settings.
Item
IP Configuration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default Gateway
Projector Name
SysLocation
SysContact
Clck the [Apply] button to save the settngs.
NOTE
• The new configuration settings are activated after restarting the net-
work connection. When the configuration settings are changed, you must re-
start the network connecton. You can restart the network connecton by clckng
[Network Restart] on the man menu.
• If you connect the projector to an exstng network, consult a network admns-
trator before settng server addresses.
ViewSonic
Configures network settings.
Enables DHCP.
Dsables DHCP.
Configures the IP address when DHCP is disabled.
Configures the Subnet Mask when DHCP is disabled.
Configures the Default Gateway when DHCP is disabled.
Configures the Projector name.
Configures the location to be referred to when using SNMP.
Configures the contact information to be referred to when us-
ng SNMP.
PJ1158
Description
62