Air filter (continued)
9.
Turn the projector on and reset the filter time using the FILTER TIME item in
the EASY MENU.
(1) Press the MENU button to dsplay a menu.
(2) Point at the "FILTER TIME" using the ▼/▲ button, then press the ► button. A
dalog wll appear.
(3) Press the ▲ button to select "RESET" on the dialog. It performs resetting the
filter time.
WARNING ►Before taking care of the air filter, make sure the power switch
s off and the power cable s not plugged n, then allow the projector to cool suf-
ficiently. Taking care of the air filter in a high temperature state of the projector
could cause an electrc shock, a burn or malfuncton to the projector.
►Use only the air filter of the specified type. Do not use the projector without
the air filter or the filter cover. It could result in a fire or malfunction to the pro-
jector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.
NOTE • Please replace the air filter when it is damaged or too soiled, and
also when you replace the lamp.
• When you replace the projection lamp, please replace the air filter. An air filter
of specified type will come together with a replacement lamp for this projector.
• Please reset the filter time only when you have cleaned or replaced the air
filter, for a suitable indication about the air filter.
• The projector may dsplay the message such as "CHECK THE AIR FLOW" or
turn off the projector, to prevent the nternal heat level rsng.
ViewSonic
PJ1158
Maintenance
96