Table of Contents
Advertisement
[Projector Control] page
1 [Power On], [Power Off]
Turns on/off the power.
[Auto Setup]
Automatically adjusts the image display position while
the image is projected.
[Reset]
Returns various setting values to their factory default
settings.
[AV Mute]
Switches whether to use the AV mute function.
[Freeze]
Temporarily pauses the image.
[Direct Power On]
Switches whether to activate the [Direct Power On]
function.
[3D Sync Invert]
Switches whether to activate the [3D Sync Invert]
function.
[3D Mode]
Sets whether to use the 3D function.
[3D-2D]
Specifies how the 3D content should appear on the
screen.
[3D Format]
Selects the appropriate 3D format content.
2 [Mute]
Switches whether to use the mute function.
[Volume]
Adjusts the volume level.
[Audio Input]
Choose the audio input terminal for each input signal.
[Input]
Switches the image input to be projected.
[Brightness], [Contrast], [Sharpness], [Phase]
Adjusts the brightness, contrast, sharpness and clock
phase of the projected image.
[BrilliantColor
]
TM
Switches whether to use the BrilliantColor
Chapter 5 Operation of Function - Web control function
function.
TM
[Gamma]
Switches the gamma mode based on the details of
the bright picture.
[Color Temperature]
Adjusts the color temperature of the projected
image.
[Picture Mode]
Switches the picture mode.
[Color Space]
Sets the system format matching the input signal.
3 [Aspect Ratio]
Switches the aspect ratio of the projected image.
[Projection Method]
Switches the projection method.
[Zoom Value]
Adjusts the zoom value.
[V. Keystone]
Corrects the keystone in vertical direction.
[H.Image Shift], [V.Image Shift]
Adjusts the horizontal or vertical position of the
projected image.
[Auto Power Off]
Sets the countdown time interval to automatically
turn off the projector when there is no signal input.
[Background Color]
Sets the display of the projected screen when there
is no signal input.
[Logo]
Set whether to display the logo on the projector
startup screen.
[Standby Mode]
Sets the standby power consumption.
[Light Power]
Switches the brightness of the light source
according to the operating environment of the
projector or the purpose.
[High Altitude]
Switches the high altitude mode.
1
2
3
ENGLISH - 89
Advertisement
Table of Contents
