Projection distance formulas
To use a projected image size not listed in this manual, check the projected image size SD (m) and use the
respective formula to calculate the value.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
When calculating the value using image size designation (value in inches), multiply the value in inches by 0.0254
and substitute it into SD in the formula.
PT-LRZ35 / PT-LRZ35U
Aspect ratio
Screen height (SH)
Screen width (SW)
Minimum (LW)
Projection
distance (L)
Maximum (LT)
PT-LRW35 / PT-LRW35U
Aspect ratio
Screen height (SH)
Screen width (SW)
Minimum (LW)
Projection
distance (L)
Maximum (LT)
34 - ENGLISH
Chapter 2 Getting Started - Setting up
16:10
= 0.530 × SD
= 0.848 × SD
= 1.1097 × SD - 0.0407
= 1.4535 × SD - 0.0397
16:10
= 0.530 × SD
= 0.848 × SD
= 1.1656 × SD - 0.0420
= 1.5252 × SD - 0.0282
16:9
= 0.490 × SD
= 0.872 × SD
= 1.1402 × SD - 0.0407
= 1.4940 × SD - 0.0402
16:9
= 0.490 × SD
= 0.872 × SD
= 1.1978 × SD - 0.0412
= 1.5688 × SD - 0.0409
4:3
= 0.6 × SD
= 0.8 × SD
= 1.2562 × SD - 0.0532
= 1.6456 × SD - 0.0443
4:3
= 0.6 × SD
= 0.8 × SD
= 1.3193 × SD - 0.0454
= 1.7279 × SD - 0.0450