Table of Contents
Advertisement
In addition, please read the contents that are related to batteries in the "Read this first!".
Note
f The remote control can be used within a distance of about 8 m (26'3") if pointed directly at the remote control signal receiver. The remote
control can control at angles of up to ±15° vertically and ±15° horizontally, but the effective control range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.
f You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to the loss of light
caused by the properties of the screen.
f When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become inoperative. Set
the projector as far from the luminous source as possible.
f The power indicator <ON(G)/STANDBY(R)> will blink if the projector receives a remote control signal.
24 - ENGLISH
Chapter 1 Preparation - About your projector
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
Caution label at the back of the remote control
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
Made in China
原产地：中国
Advertisement
Table of Contents
