Panasonic PT-LRZ35 Operating Instructions Manual page 74

[Projector →
Device]
[Device →
Projector]
Note
f The <HDMI IN 1> terminal of the projector is used as the default terminal for HDMI Link control.
Setting [Projector → Device]
1) Press as to select [Projector → Device].
2) Press w or the <ENTER> button.
f The [Projector → Device] screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[Power On / Off]
[Disable]
[Power Off]
Note
f When set to [Power On / Off]:
- Turning on the projector turns on the HDMI-CEC compatible device connected to the <HDMI IN 1> or <HDMI IN 2> terminal when the input
is HDMI 1 IN or HDMI 2 IN.
- Turning off the projector turns off all the connected HDMI-CEC compatible devices.
- Switching the input of the projector to HDMI 1 IN or HDMI 2 IN turns on the HDMI-CEC compatible device connected to the <HDMI IN 1>
or <HDMI IN 2> terminal.
f When set to [Power Off]:
- Turning off the projector turns off all the connected HDMI-CEC compatible devices.
f Switching from [Disable] or [Power Off] to [Power On / Off] turns on the HDMI-CEC compatible device connected to the <HDMI IN 1> or
<HDMI IN 2> terminal when the input of the projector is HDMI 1 IN or HDMI 2 IN.
Setting [Device → Projector]
1) Press as to select [Device → Projector].
2) Press w or the <ENTER> button.
f The [Device → Projector] screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[Power On / Off]
[Disable]
[Power On]
Note
f When set to [Power On / Off]:
- Turning on the HDMI-CEC compatible device turns on the projector, and switches the projector's input to HDMI 1 IN or HDMI 2 IN to which
the device is connected.
- Turning off the HDMI-CEC compatible device connected to the <HDMI IN 1> or <HDMI IN 2> terminal turns off the projector when the input
of the projector is HDMI 1 IN or HDMI 2 IN.
f When set to [Power On]:
- Turning on the HDMI-CEC compatible device turns on the projector, and switches the projector's input to HDMI 1 IN or HDMI 2 IN to which
the device is connected.
74 - ENGLISH
Chapter 4 Settings - [Setup] menu
Enables or disables the projector to perform interlocking control of the HDMI-CEC compatible
device.
Enables or disables the HDMI-CEC compatible device to perform interlocking control of the
projector.
The HDMI-CEC compatible device turns on or off in conjunction with the power-on/off operation of
the projector.
Disables the projector to perform interlocking control of the device. Even if the power status of the
projector changes, the power status of the device will not be affected.
Turning off the projector turns off all the devices connected to the <HDMI IN 1> and <HDMI IN 2>
terminals. The power-on operation is not interlocked.
The power status of the projector interlocks with the power-on/off operation of the device.
Disables the device to perform interlocking control of the projector. Even if the power status of the
device changes, the power status of the projector will not be affected.
Turning on the device turns on the projector, and the input (HDMI 1 IN / HDMI 2 IN) is switched to
that of the device.