Table of Contents
Advertisement
About your projector
Remote control
1
2
3
4
5
6
7
1 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 <MENU> button
Displays or hides the main menu. (x page 53)
When the sub menu is displayed, pressing it will return to
the previous screen.
3 <ENTER> button / asqw buttons
Used to navigate through the menu screen.
4 <PICTURE> button
Displays the [Picture Mode] setting screen.
(x page 50)
5 <KEYSTONE +> button / <KEYSTONE -> button
Corrects the distortion of the projected image.
(x page 49)
6 Number (<0> ~ <9>) buttons
Used for entering a password.
7 <ON SCREEN> button
Switches on (display)/off (hide) the on-screen display
function. (x page 48)
8 Remote control signal transmitter
9 <AUTO SETUP> button
Automatically adjusts the image display position while
the image is projected. (x page 48)
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on the back of the remote control unit (see picture below).
g Do not use a new battery together with an old battery.
g Do not use unspecified batteries.
g Make sure the polarities (+ and -) are correct when inserting the batteries.
Chapter 1 Preparation - About your projector
8
9
10
11
12
13
14
15
16
10 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 47)
11 <MUTE> button
Used when temporarily turning off the audio.
(x page 47)
12 <VOLUME +> button / <VOLUME -> button
Adjusts the volume of the built-in speaker or audio
output. (x page 47)
13 <ECO> button
Displays the setting screen relating to ECO
management. (x page 50)
14 Input selection buttons (<COMPUTER 1> /
<COMPUTER 2> / <VIDEO> / <HDMI1> / <HDMI2>)
Switches the input signal to project. (x page 44)
15 <ASPECT> button
Displays the [Aspect Ratio] setting screen.
(x page 49)
16 <INFO> button
Displays the status of the projector. (x page 82)
17 <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 49)
18 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 48)
17
18
ENGLISH - 23
Advertisement
Table of Contents
