Table of Contents
Advertisement
rControl panel and indicators
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
3 <ENTER> button
Determines and executes an item in the menu screen.
4 <VOL-> button / <VOL+> button
Adjusts the volume of the built-in speaker or audio
output. (x page 47)
5 <MENU> button
Displays or hides the main menu. (x page 53)
When the sub menu is displayed, pressing it will return to
the previous screen.
6 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 47)
26 - ENGLISH
Chapter 1 Preparation - About your projector
8
1
2
3
4
5
6
9
10
11
12
4
7
7 Remote control signal receiver
8 Light source indicator <LIGHT>
Indicates the status of the light source.
9 <AUTO SETUP> button
Automatically adjusts the image display position while
the image is projected. (x page 48)
10 Temperature indicator <TEMP>
Indicates the internal temperature status.
11 <INPUT SELECT> button
Displays the [Input] setting screen. (x page 44)
In addition, pressing this button will automatically search
for an available input if the [Setup] menu → [Options] →
[Signal Search] has been set to [On].
12 asqw buttons
Used to select the menu screen items, switch the setting
or adjust the level.
Also used to enter a password in the [Security] menu.
Advertisement
Table of Contents
