Setting The Display Language; Display Messages - SMA Sunny Boy 6000TL‑US Installation Manual

7 Displays and Messages
7.1 Setting the Display Language
The LCD can display information in 1 of 4 different languages. The language is configured via 2 slide
switches that are located on the lower edge of the LCD.
1. Open the Sunny Boy as described in Section 8.1 "Opening the Sunny Boy", page 55.
2. Set the switches to the required language, as shown below.
Language
German
English
French
Spanish
3. Close the Sunny Boy as described in Section
8.2 "Closing the Sunny Boy", page 56.
☑ The display language is set.
7.2 Display Messages
Each error message is displayed for 5 seconds
• After 5 seconds, the LCD scrolls through the regular operation messages.
• The error message is repeated until the error is rectified.
• You will find an exact explanation of the display messages in the Sunny Boy user manual.
Start phase
• Inverter type.
• Firmware version of the operation control unit and
the current controlling unit.
48 SB6-11TL-US-IA-en-13
Switch S2 Switch S1
B
B
A
A
B
A
B
A
BFR Version x.xx.
SRR Version x.xx
SMA America, LLC
Sunny Boy
WRXKuxxx
Installation Manual