Closing The Sunny Boy - SMA Sunny Boy 6000TL‑US Installation Manual

8 Opening and Closing
8.2 Closing the Sunny Boy
Damage to the enclosure lid can affect the seal between the enclosure lid and the
enclosure
There may be an ingress of moisture.
Potential damage to the Sunny Boy.
• Handle the enclosure lid with care.
• Check the seal on the inner side of the enclosure lid for damage.
• When closing, no moisture may remain in the enclosure.
☐ Cables must not obstruct the seal of the enclosure lid.
☐ The enclosure lid must not exert any pressure on the connections.
☐ All 6 screws with conical spring washers for attaching the enclosure lid are available.
☐ The seal in the inside of the lid must be undamaged and in the correct position.
1. Mount the enclosure lid onto the Sunny Boy.
The 6 holes in the cover must be aligned with the
6 thread bores of the enclosure.
56 SB6-11TL-US-IA-en-13
SMA America, LLC
Installation Manual