Connecting The Ac Cables In The Sunny Boy - SMA Sunny Boy 6000TL‑US Installation Manual

SMA America, LLC
5.4.2 Connecting the AC Cables in the Sunny Boy
1. Open the Sunny Boy as described in Section 8.1 "Opening the Sunny Boy", page 55.
2. Feed the cable through the rubber grommet into the
inverter.
3. Pull the cable back slightly so as to seal the rubber
grommet.
4. Connect the green-yellow cable of the DC
Disconnect to the terminal labeled
5. Connect the white cable of the DC Disconnect to the
terminal labeled N.
6. Connect the black cable of the DC Disconnect to the
terminal labeled L1.
Installation Manual
.
5 Electrical Connection
2 3 5 7 A B + -
2 3 5 7 A B + -
SB6-11TL-US-IA-en-13 37