Encore Clearance Chart - Vermont Castings Encore 2550 Installating And Operation Manual

Encore Woodburning Stove
For use with either 6" or 8" flue collar/chimney connection
No stove heat shields
Top Exit, rear stove h.s.,
single-wall chimney con-
nector heat shields 1
Rear Exit, rear stove
heat shield only
Top Exit, rear stove h.s.,
double-wall chimney
connector
3
Single-wall connector,
No chimney connector
heat shields
Single-wall connector,
Chimney connector heat
shields installed
Double-wall connector
3
* Clearances with double-wall connectors and protected surfaces have not been tested for the Encore.
1. A ceiling heat shield, 24" (610 mm) in diameter and suspended 1" (25 mm) from the ceiling, must surround the chimney
connector in installations in which the chimney connector penetrates the ceiling. The chimney connector shield extends
only to 28" (710 mm) above the flue collar.
2. The ceiling heat shield required when the chimney connector shields are used should meet the wall protector. This will
require trimming the ceiling shield along the line of intersection with the wall protector.
3. In top-exit installations, this clearance requires the use of a rear stove heat shield with the flue collar insert installed.
14

Encore Clearance Chart

Unprotected Surfaces
Stove Installed
Parallel to Corner
Side Rear
(A) 24" (B) 31"
(610 mm) (787 mm)
(G) 24" (H) 19"
(610 mm) (483 mm)
(M) 24" (N) 19"
(610 mm) (483 mm)
(G) 24" (H) 19"
(610 mm) (483 mm)
Chimney Connector Clearance
24" (610 mm)
12" (305 mm)
12" (305 mm)
Clearance to Combustibles in Front of Stove
Stove Clearance
Stove
in Corner
Corners Side
(C) 24" (D) 8"
(610 mm) (203 mm)
(I) 17" (J) 8"
(432 mm) (203 mm)
N/A (P) 8"
(203 mm)
(I) 24"
(610 mm)
All Installations
(S) 48" (1219 mm)
Protected Surfaces
Stove Installed
Parallel to Wall
Rear
(E) 15"
(380 mm)
(K) 11"
(280 mm)
(Q) 11"
(280 mm)
*
8" (203 mm)
4" (102 mm)
2
*
Stove
in Corner
Corners
(F) 8"
(203 mm)
(L) 7"
(178 mm)
N/A
2000956