Flame & Temperature Adjustment; Flame Characteristics & Appearance - Vermont Castings DBT33 Installation Instructions & Homeowner's Manual

F & T
LAME EMPERATURE
A
DJUSTMENT
RN/RP & EN/EP Models
For units equipped with 'HI/LO' valves the ame adjustment
is accomplished by rotating the 'HI/LO' adjustment knob
located near the centre of the gas control valve, Fig. 44 & 45
DBT33
Fig. 47
Fig. 44
Fig. 45
DBT36
Fig. 48
F C
LAME HARACTERISTICS
It is important to periodically perform a visual check of the
pilot and burner ames. Compare them to the pictorials illus-
trated below, Figs. 43 - 49.
If the ame patterns appear abnormal contact a qualied ser-
vice provider for service and adjustment.
SIT Top Convertible
DBT39
Fig. 49
SIT
Fig. 43
DBT33/DBT36/DBT39 -22- 10002789/0