Flame & Temperature Adjustment; Flame Characteristics; Inspecting The Venting System - Vermont Castings DVR28IN Installation Instructions And Homeowner's Manual

Flame & Temperature Adjustment
To adjust Hi/Lo setting, push either the high or low con-
trol button on remote control transmitter.
Fig. 33 Flame adjustment for American Flame valve.
FP1796
Wireless remote
3/07

Flame Characteristics

It is important to periodically perform a visual check of
the pilot and the burner flames. Compare them to Fig-
ures 34-35. If any of the flames appear abnormal call a
service person.
Fig. 34 Correct pilot flame appearance.
20012301
ON
OFF
HI
LO
FP1759
FP1778
������
��� �����
����
Vermont Castings DVR28 Direct Vent Gas Fireplace
Fig. 35 Correct DVR28 flame. Center flame should be ap-
proximately 5¹⁄₂" (140 mm) high.

Inspecting the Venting System

����� ����� �����
This appliance venting system is designed and con-
structed to develop a positive flow adequate to remove
����
flue gases to the outside atmosphere.
Any foreign objects in the venting system, except those
designed specifically for the venting system, may cause
spillage of flue gases.
To inspect the venting system, make sure the main gas
valve is off. Remove window frame assembly (Refer to
Window Frame Assembly Removal Section). Using a
flashlight, check the area above the baffle in the com-
bustion dome. Clean if necessary.
LG480
19