Table of Contents
Advertisement
The 36CDVZ logs are shipped in place. If a log is bro-
ken, refer to the replacement parts list for a replacement.
Figure 63 shows where the logs are secured to the fire-
place.
Figure 63
Flame & Temperature Adjustment
RN/RP & EN/EP Models
For units equipped with "HI/LO" valves the flame adjustment
is accomplished by rotating the "HI/LO" adjustment knob
located near the center of the gas control valve. (Figs.
64)
SIT 820 Valve
Turn
counterclockwise
to increase
flame height
Fig. 64 Flame adjustment knob for SIT valve.
FP390
Figure 66
FLAME ADJUSTMENT KNOB
11/21/96
20014621
Logs
Turn clockwise
to decrease
flame height
LG480
cdvx logs
Yellow Flame
LG481
CDVZ Series Direct Vent Gas Fireplace
Lava Rock Placement
The lava rock provided with this fireplace must be placed
on the firebox base around the burner assembly. (Fig.
63)
Under no circumstances should this lava
rock be placed on any part of the burner.
Lava Rock
Flame Characteristics
It is important to periodically perform a visual check of the
pilot and burner flames. Compare them to the illustrations.
(Figs. 65 & 66)
If the flame patterns appear abnormal contact a qualified
service provider for service and adjustment.
Fig. 65 Correct pilot flame appearance.
LG480
SIT RN/RP
Red Glow, Yellow Tips
FP1541
29
Hide quick links:
Advertisement
Table of Contents
