Figure 34. SAN256N director rear chassis FRU locations
FRU removal and replacement procedures
This section provides the necessary step-by-step procedures needed by Field Service
personnel to remove and replace the FRU assemblies in the SAN256N director.
Any special tools required to be used during the removal and replacement procedure
are specified prior to the step-by step procedure. Otherwise, the tools contained in the
standard field service toolbox can be used.
All removal and replacement procedures must be followed in the step-by step sequence
given unless otherwise specified. Any special procedures will be indicated by Boldface
Type.
Upon the completion of each FRU removal and replacement procedure, the defective
assembly must be returned to IBM.
78
SAN256N Director 2045-N16
3
6
7
5