Alphanumeric Page Home; Numeric Page Home; E-Mail Page Home - IBM TotalStorage SAN256N Director 2045-N16 Installation And Maintenance Manual

Alphanumeric Page Home

This feature allows an alphanumeric page to be sent to a designated number. This
feature also allows for an additional phone number to be sent an authorization string.
Two separate alphanumeric page configuration screens are available, allowing for the
creation of two distinct profiles.
Use the following procedure to enable the alphanumeric page home feature.
1. At the Notification Preferences screen, select the Alphanumeric Page-1 (or -2)
2. Fill in the information boxes. The Additional Information, Paging System Phone
3. Select the Enable Alphanumeric Page home box. A checkmark should now appear
4. Click the Test button. If the test is successful, click the Apply button to save the
Repeat the above steps to configure the second alphanumeric page if required.

Numeric Page Home

The numeric page home function allows IBM field support personnel to receive warnings
from the Enterprise Manager about alarm conditions that need immediate attention. A
IBM field support person then dials into the reporting Enterprise Manager using
pcAnywhere and determine what problem(s) exist.
Use the following procedure to enable the numeric page home feature.
1. At the Notification Preferences screen, select the Numeric Page tab. The Numeric
2. Fill in the information boxes. The Comm Port field defines the location of the external
3. Select the Enable Numeric Page box. A checkmark should now appear in the box.
4. Click the Test button. If the test is successful, click the Apply button to save the

E-Mail Page Home

This feature allows an e-mail message to be sent to a designated address. Up to four e-
mail addresses can be assigned.
72
SAN256N Director 2045-N16
tab. The Alphanumeric Page Home Settings information screen is displayed.
Number, Pager PIN, and Additional Information boxes provide site information for
IBM field support personnel. The Paging System Phone Number, Pager PIN,
Comm Port, and Modem Initialization String are used for dialing the pager service.
Enable Additional Notification (optional) activates a secondary paging phone
number in the event the primary number is inactive.
in the box.
configuration. The "Alphanumeric Page Enabled" message should appear at the
bottom of the screen. If it does not, repeat the steps you took to configure the
Alphanumeric Page. If it does not enable correctly again, call IBM field support.
Page information screen is displayed.
modem. The Dial String and Modem Initialization String are used for dialing the
pager service.
configuration. The"Alphanumeric Page Enabled" message should appear at the
bottom of the screen. If it does not, repeat the steps you took to configure the
Numeric Page. If it does not enable correctly again, call IBM field support.