Appendix B: Ac Power Reference; Ac Power Cables; North America And International Ac Power Cables; Ac Power Cable Assembly Part Numbers For San256N Directors - IBM TotalStorage SAN256N Director 2045-N16 Installation And Maintenance Manual

Appendix B. AC power reference
This appendix provides information about AC power cables for the SAN256N director.

AC power cables

The power service provided to each SAN256N chassis and SANC40N cabinet AC power
cable connections must be a minimum 10 Amp, 200 to 240 Volt AC rated circuit.
It is recommended that you use the pre-wired AC power cables available from IBM.
Refer to the AC Power Cable Assembly parts list in Table 23. below and the examples of
cables shown in Figure 46.
Table 23. AC Power Cable Assembly Part Numbers for SAN256N directors
AC Power Cable Assembly
North American
International
Figure 46. North America and International AC power cables
If the AC power cable and plug received with the SAN256N director is not compatible
with the electrical requirements in your region, consult a person trained in the electrical
wiring requirements and knowledgeable with the electrical codes (rules) in your region.
© Copyright IBM Corp. 2004
Part Numbers
1012315-001
1012315-002
North America International
123