Avaya S8800 Installing page 20

Installing the S8800 Server
3. Turn the bracket (4) to secure it to the support arm. See the preceding figure.
4. To attach the other side of the support arm to the backside of the slide rail, pull
5. Pull out the mounting bracket pin (7) and slide the mounting bracket (8) into the
6. Push the bracket into the slide rail until the spring-loaded pin snaps into place.
20 Installing the Avaya S8800 Server for Avaya one-X Speech
the pin out (5), and then slide the bracket (6) into the slide rail. See the following
figure.
slide rail onto which you are installing the cable-management arm. See the following
figure.
November 2009