Subaru Forester 2012 Owner's Manual page 99

2-14
Keys and doors
! Locking with the rear lock button
1) Rear lock button
Carry the access key, close all doors
including the rear gate and press the rear
lock button. The rear gate and all doors
will be locked. Also, the hazard warning
flashers will flash once.
For details about the factory setting
"
(default setting), refer to
s00af
F27. For further details, we recom-
tings"
mend that you consult a SUBARU dealer.
!
Door unlock selection function (ex-
cept models with double locking
system)
The door unlock selection function makes
it possible to unlock the driver's door
without unlocking any other doors.
The operational/non-operational setting
S02AP010213
for this function can be changed by a
SUBARU dealer.
Operational: Only the door for which the
door handle is gripped will be unlocked.
Non-operational: All doors and the rear
gate are unlocked.
For details about the factory setting
(default setting), refer to
F27. For further details, we recom-
tings"
mend that you consult a SUBARU dealer.
!
Power saving function
The keyless access function will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
. When the keyless access function and
the remote keyless entry system have not
been used for 2 weeks or longer while all
doors are locked
. When the access key has been left in
Function set-
the operating range for 10 minutes or
longer while all doors are locked
! Recovery from power saving mode
When one of the following is operated, the
keyless access function will be recovered.
S02AP0105
. Unlock by gripping the door handle or
pressing the rear gate opener button on
the rear gate
. Lock or unlock by the remote keyless
entry system
. Lock or unlock by the mechanical key
!
Automatic locking (except models
with double locking system)
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.
"
Function set-
s00af
The function's operational/non-operational
setting and the time until automatic locking
takes place can be changed.
. Models with genuine SUBARU navi-
S02AP0103
gation system:
The setting can be changed on the
monitor screen. For details, refer to the
Owner's Manual supplement for the navi-
gation system. The setting can also be
changed by a SUBARU dealer. We
recommend that you contact a SUBARU
dealer for details.
. Models without genuine SUBARU
navigation system:
The setting can be changed by a
SUBARU dealer. For details, we recom-
mend that you contact a SUBARU dealer.
S02AP010301
S02AP0104