Power Seat (Driver's Seat - If Equipped) - Subaru Forester 2012 Owner's Manual

Hide thumbs Also See for Forester 2012:
Table of Contents

Advertisement

1-4
Seat, seatbelt and SRS airbags
!
Seat height adjustment (if
equipped)
1)
When the lever is pushed down, the seat
is lowered.
2)
When the lever is pulled up, the seat
rises.
The height of the seat can be adjusted by
moving the seat adjustment lever up and
down.
& Power seat (driver's seat – if
equipped)
S01AA0103
1)
Seat position forward/backward con-
trol switch
To adjust the seat forward or backward,
move the control switch forward or
backward. During forward/backward ad-
justment of the seat, you cannot adjust
the seat cushion angle or seat cushion
height.
2)
Seat cushion angle control switch
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
3)
Seatback angle (reclining) control
switch
To adjust the angle of the seatback, tilt
the control switch forward or backward.
4)
Seat height control switch
To adjust the seat height, pull up or push
down the rear end of the control switch.
S01AA02
To prevent the passenger from slid-
ing under the seatbelt in the event of
a collision, always put the seatback
in the upright position while the
vehicle is in motion. Also, do not
place objects such as cushions
between the passenger and the
seatback. If you do so, the risk of
sliding under the lap belt and of the
lap belt sliding up over the abdomen
will increase, and both can result in
serious internal injury or death.
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents