Table of Contents
Advertisement
S6
!
S7
60
S8
2
S9
6
S10
7
NOTE: If you set S10 = 255, the modem will not hang up when
carrier is lost. Dropping DTR hangs up the modem. This
possibility is country-dependent.
S11
!
Sportster Winmodem 33600 & x2/56K - User's manual
Sets the number of seconds the modem
waits before dialing. If X n is set to X2 or X4,
the modem ignores this register and dials as
soon as it detects a dial tone (fast dials). The
range of acceptable values is country-
dependent.
Sets the number of seconds the modem
waits for a carrier. May be set for much
longer duration if, for example, the modem is
originating an international connection.
Sets the duration, in seconds, for the pause
(,) option in the Dial command.
Sets the required duration, in tenths of a
second, of the remote modem's carrier sig-
nal.
Sets the duration, in tenths of a second, that
the modem waits after loss of carrier before
hanging up. This guard time allows the
modem to distinguish between a line hit, or
other disturbances that momentarily break
the connection, from a true disconnect (hang
up) by the remote modem.
While we don't recommend connecting the
modem to a line with call waiting, if you have
it, you may wish to adjust this setting upward
to prevent the modem from misinterpreting
the second call signal as a disconnect by the
remote modem. A better alternative is to ask
your phone company how to temporarily
disable call waiting (usually *70W). For
example: ATDT *70W phonenumber .
Sets the duration and spacing, in milli-
seconds, for tone dialing. The range of
acceptable values is country-dependent.
47
Advertisement
Table of Contents
