Step 1: Insert The Modem Into The Computer - US Robotics 33600 User Manual

STEP 1: Insert the Modem Into the Computer

Installation Procedure
1. Turn off and unplug the computer.
2. Unplug all the peripheral devices (screen, printer,
etc.).
3. Remove the computer's cover to have easy access
to the internal bus connectors.
4. Choose an unused expansion slot and remove its
bracket (shaped like a square ruler) located on the
back panel.
5. Insert the board into the groove making sure that its
edge makes contact with the back panel of the
machine.
6. Fasten the edge to the computer's panel, replace
the cover and screws.
7. Plug in the end of the phone cord that came with
the modem into the modem's TELCO jack (The
6 Sportster Winmodem 33600 & x2/56K - User's manual
Inserting the board into the groove.