Table of Contents
Advertisement
&G n
Sets Guard Tone.
&G0
&G1
&G2
&H n
Sets Transmit Data(TD) flow control.
&H0
&H1
&H2
&H3
&I n
Sets Receive Data (RD) software flow control
(see also &R n ).
&I0
&I1
&I2
&K n
Enables/disables data compression.
&K0
&K1
&K2
&K3
&M n
Sets Error Control (ARQ) 1200 bps and higher.
&M0
&M1
&M2
&M3
&M4
&M5
&N n
Sets forced connect speed. If connection cannot be
established at this speed, the modem will hang up.
&N0
&N1
&N2
&N3
&N4
&N5
&N6
&N7
&N8
44
Sportster Winmodem 33600 & x2/56K - User's manual
No guard tone, U.S. and Canada.
550 Hz guard tone, some European
countries, requires B0 setting.
1800 Hz guard tone, U.K., requires B0
setting.
Flow control disabled.
Hardware flow control, Clear to Send (CTS).
Software flow control, XON/XOFF.
Hardware and software control.
Software flow control disabled.
XON/XOFF signals to your modem and
remote system.
XON/XOFF signals to your modem only.
Data compression disabled.
Auto enable/disable.
Data compression enabled.
MNP5 compression disabled.
Normal mode, error control disabled.
Reserved.
Reserved.
Reserved.
Normal/ARQ.
ARQ mode.
Variable rate.
300 bps.
1200 bps.
2400 bps.
4800 bps.
7200 bps.
9600 bps.
12.000 bps.
14.400 bps.
Advertisement
Table of Contents
