US Robotics 33600 User Manual page 14

If the configuration you've chosen does not work , you chose an
I/O address and/or an IRQ that is not available:
If you chose an unavailable I/O address, you will get an error
message. Choose another I/O address in the Configuration
dialog box that appears.
If you chose an unavailable IRQ, you'll find out later when your
communications software program tells you it cannot find the
modem. At that point choose another IRQ in the Configuration
dialog box. (You can find it by clicking on the Configuration icon
in the Sportster Winmodem 33600 & x2/56K group in the
Program Manager window.)
Running the Installation Program on a
Windows 95 System
After inserting the Sportster Winmodem 33600 & x2/56K by
following the steps in the STEP 1: Insert the Modem Into the
Computer section page 6 :
1. When the screen tells you to, insert the installation
disk.
2. Follow the screen commands to complete the
installation program.
NOTE: At one point, you'll be told which COM port the modem
has been installed on. Write the COM port on the first page of
this manual. You may need to know the number later.
When you've finished the installation program, a Sportster
Winmodem 33600 & x2/56K icon will appear in the Control Panel
window. You'll then be ready to install the communications
software. See instructions below.
10 Sportster Winmodem 33600 & x2/56K - User's manual