Introduction The U.S. Robotics Ethernet Network Card is a dual-speed Ethernet card for PCI local bus-compliant computers. A true Plug and Play device, this card is auto-configurable upon power up and also supports auto-negotiation to automatically select the optimum speed and communication mode of an attached device.
Installation Procedure All Users Make sure that your computer is shut down. Turn off your computer and all peripheral devices. Unplug your computer. Remove the cover from your computer. Unscrew and remove the expansion slot cover from a free PCI slot. Insert the Ethernet Network Card completely into the PCI slot. Secure the modem with the slot screw.
Windows XP Users When the Found New Hardware Wizard detects the NIC, select Install from a list or specific location and click Next. Select Search for the best driver in these locations and then select Include this location in the search: . Insert the Installation CD into your CD-ROM drive.
Troubleshooting Check the following troubleshooting items before contacting the U.S. Robotics Technical Support department. I am experiencing compatibility problems between my computer and the Ethernet Network Card. Check with your computer’s documentation to make sure that your computer’s BIOS supports the following: •...
Page 6
Country Voice (801)-401-1143 Canada (801)-401-1146 Country Voice Argentina AT&T Direct + (877) 643-2523 Brazil AT&T Direct + (877) 487-6523 México AT&T Direct + (877) 643-2523 Chile AT&T Direct + (877) 643-2523 Colômbia AT&T Direct + (877) 643-2523 Costa Rica AT&T Direct + (877) 643-2523 Peru AT&T Direct + (877) 643-2523 Puerto Rico...