Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for US Robotics USR997900
Summary of Contents for US Robotics USR997900
-
Page 1: Installation Guide
10/100 Mbps Ethernet Network Card Installation Guide part number R24.0191.00... -
Page 2: Before You Begin
Before You Begin Before you begin, we recommend you uninstall any other Network Interface Cards (NICs) you have in your system. Refer to your old NIC’s documentation for removal instructions. Write the serial number of the U.S. Robotics Ethernet Network Card in the space below. The serial number is located on the NIC and on the NIC’s box. -
Page 3: Windows 2000 Users
Windows 95 and 98 users When Windows detects the new hardware, click Next. Select Search for the best driver for your device and click Next. Insert the Installation CD into your CD-ROM drive. Select Specify a location, type D:\driver, and click Next. If your CD-ROM drive uses a different letter, type that letter in place of “D.”... -
Page 4: Windows Xp Users
Windows NT users Insert the Installation CD into your CD-ROM drive. Type D:\driver and click OK. If your CD- ROM drive uses a different letter, type that letter in place of “D.” Select the USR 10/100 Mbps Ethernet Network Card and click OK. Follow the on-screen instructions. -
Page 5: Troubleshooting
Troubleshooting Check the following troubleshooting items before contacting U.S. Robotics Technical Support. I am experiencing compatibility problems between my computer and the Ethernet Network Card. Some PCI computers are not self-configuring and require you to perform some or all of the following functions by motherboard jumper changes and/or BIOS Setup program configuration:... - Page 6 parameters may be configurable. Always consult your computer manual for information on changing motherboard jumper settings and BIOS Setup program parameters for use with PCI network cards. If you set a motherboard jumper and modify the computer’s BIOS Setup, make sure the jumper and BIOS settings match.
-
Page 7: Support Resources
Possible Solution: Make sure the computer and other network devices are receiving power. If you suspect a power outlet to be faulty, plug another device into it to verify that it is working. Possible Solution: If the network card’s speed or duplex mode has been configured manually, make sure it matches that of the attached network device port. - Page 8 Country Voice On-line (801)-401-1142 http://www.usr.com/support/s-online_emailtechie.asp Canada (801)-401-1146 http://www.usr.com/support/s-online_emailtechie.asp Country Voice Argentina AT&T Direct + (877) 643-2523 Brazil AT&T Direct + (877) 487-6523 México AT&T Direct + (877) 643-2523 Chile AT&T Direct + (877) 643-2523 Colômbia AT&T Direct + (877) 643-2523 Costa Rica AT&T Direct + (877) 643-2523 Peru...
- Page 9 Manufacurer’s Declaration of Conformity U.S. Robotics Corporation 935 National Parkway Schaumburg, IL 60173 U.S.A. declares that this product conforms to the FCC’s specifications: Part 15, Class B: Operation is subject to the following conditions: 1.) this device may not cause harmful electomagnetic interference, and 2.) this device must accept any interference received including inter- ference that may cause undesired operations.
- Page 10 télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées cidessus n’empêche pas la dégradation du service dans certaines situations. Les réparations de matériel homologué doivent être coordonnées par un représentant désigné...
- Page 11 WARRANTIES EXCLUSIVE: IF A U.S. ROBOTICS PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REM- EDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, RE- PLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U.S. ROBOTICS’S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDI- TIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION...