Rack Mounting - Avaya Aura G450 Installation, Quick Start

2. Attach the mounting bracket with the cable guides to the front of the chassis.

Rack mounting

1. Attach the mounting brackets to the Communication Manager Branch G450 Media
Gateway. Use five of the supplied screws for each bracket.
Figure 2: Front mounting bracket placement
Figure 3: Middle mounting bracket placement
2. Insert two mounting screws, one on either side of the rack. These screws are be the
bottom screws of the mounting brackets.
3. Turn the screws only 3 to four times so you can rest the brackets on the screws.
4. Position the Communication Manager Branch G450 Media Gateway in the rack so that the
bottoms of the brackets are resting on the protruding screws.
5. Verify that the screw holes are aligned with the positions of the holes in the rack.
6. Insert two additional mounting screws on each side.
7. Verify that the Communication Manager Branch G450 Media Gateway is level and
horizontal.
8. Tighten the mounting screws. Avoid overtightening.
Mount
Issue 1 May 2009 7