Avaya Aura G450 Installation, Quick Start page 7

Mount
Using your Communication Manager Branch G450 Media Gateway
on a table
To use the Communication Manager Branch G450 Media Gateway on a tabletop, you must
attach the provided rubber feet to the underside of the Communication Manager Branch G450
Media Gateway.
1. Remove the four rubber feet from the package.
2. Turn the Communication Manager Branch G450 Media Gateway upside down.
Note:
Ensure the base of the Communication Manager Branch G450 Media Gateway is
Note:
clean.
3. Peel the feet off the backing sheet.
4. Position each foot into one of the mounting sites, near each corner of the Communication
Manager Branch G450 Media Gateway.
5. Press each foot firmly so that it adheres to the Communication Manager Branch G450
Media Gateway.
Mounting your Communication Manager Branch G450 Media
Gateway in a rack
You can mount the Communication Manager Branch G450 Media Gateway in a standard 19-
inch rack.
!
CAUTION:
The Communication Manager Branch G450 Media Gateway weighs at least 31
CAUTION:
pounds (14 kg). Two people might be needed to mount the Communication
Manager Branch G450 Media Gateway in the rack.
You must attach the supplied mounting brackets to the front or the middle of the Communication
Manager Branch G450 Media Gateway.
Before you start
Ensure that the rack is bolted to the floor and is earthquake-protected, if required. If the
●
rack is not securely fixed in place, do not continue with the installation.
Mount
Issue 1 May 2009 5