Avaya Aura G450 Installation, Quick Start page 4

Water or moisture cannot enter the case of the chassis.
●
There is a free flow of air around the Communication Manager Branch G450 Media
●
Gateway and the vents in the sides of the case are not blocked.
No more than 25 feet (7.6 m) from an approved ground or close enough for use with the
●
supplied secondary grounding conductor.
Note:
If the supplied secondary grounding conductor does not reach the approved
Note:
ground, you must contact a licensed electrician to install a supplementary ground
conductor.
The environmental conditions match the following requirements:
●
Ambient temperature - 32
●
Relative humidity - 10 to 90% relative humidity.
●
Minimum clearance for ventilation - 18 inches (45 cm).
●
Weight support - to 35 lbs (10-16 kg).
●
Required equipment and computer hardware
Prepare the tools you require to mount the CMBE G450 Media Gateway according to the
following table:
You might also need wire cutters to attach the grounding conductors, if your site uses a
●
ground block.
To configure your Communication Manager Branch G450 Media Gateway, you need a
●
computer with a minimum screen resolution of 1024x768 pixels and either Internet
Explorer 6.0 or Mozilla Firefox 2.0 or later.
2 Communication Manager Branch G450 Media Gateway Installation Quick Start
o
To mount
on...
Rack or wall Phillips-head screwdriver.
Wall Plywood board: ¾ in (1.2 cm) thick and at
●
least 4 x 4 ft (1.2 x 1.2 m) in size (customer-
supplied).
Wood screws (4 minimum).
●
Pan head at least ¾ in., # 10-12 screw to
●
fasten the Communication Manager Branch
G450 Media Gateway to the wall.
o o o
to 104 F (0 to 40 C).
Prepare these tools