Fitting The Battery - Invacare Rea Bellis Assembly Instructions Manual

1.
A
C
Tools:
2.
10

FITTING THE BATTERY

D
F
B
5 mm Allen key
10 mm fixed spanner
17 mm fixed spanner
A
A = Seat
B = Backrest
1. To fi t the battery under the seat, the existing
screw (A) and nut (B), which are by the rear
wheel plate, are to be used. The existing washer
(C) does not need to be included. When these
details have been fi tted, the battery must also be
attached around the cross tube using the screw
(D), spacer (E) and nut (F).
E
2. Connect the cables from the seat tilt piston (A),
the backrest tilt piston (B) and the control box
(C) according to the diagram. Fix hanging cables
at suitable points under the chair using cable ties,
to keep them out of the way
C
B
REA BELLIS