Fitting Trunk Supports - Invacare Rea Bellis Assembly Instructions Manual

1.
A
Tools: 4 mm Allen Key
2.
Tools: screwdriver
REA BELLIS
Trunk supports
1. You adjust the trunk support attachment by
2. You can open the trunk support pad using the zip.
loosening screw (A) using a 4 mm Allen key. Adjust
to the position that you require and retighten
the screw.
You can then adjust the trunk support by loosening
the two screws using a Phillips screwdriver and
moving the trunk support forwards or backwards.
Retighten the screws and close the zip.
13