Invacare Rea Bellis Assembly Instructions Manual page 21

1.
C
D
2.
E
F
REA BELLIS
Table tray
D
A
1. Loosen the screws (A) on the underside of the
armrest. Remove the armrest pad. Fit the table
tray's attachment casing (B) and spacer block
(C) between the armrest pad and its attachment
plate. Attach the armrest pad with the new
screws (D).
B
2. The table tray is attached by putting the pins (E)
into the attachment casings (F) and pushing them
down into place.
21