Fitting Detachable Trunk Supports - Invacare Rea Bellis Assembly Instructions Manual

1.
A
Tools: 4 mm Allen Key
2.
3.
Tools: 5 mm Allen Key
12
Detachable trunk supports
1. Remove the backrest pad and fi t both halves of
the trunk support attachment into the grooves
on the backrest. Use sleeve nut (A) and screw (B)
to fi t the "insert bracket" into the trunk support
attachment. Loosen screw (B) to adjust the width
and height of the trunk support.
Press the trunk support pad with its sleeve tube
onto the insert bracket.
B
2. Press the lock button (C) to remove the trunk
support pad.
NB! Ensure that the lock button (C) on the
insert bracket is in its correct position on
C
the sleeve tube of the trunk support.
3. You can use the screw (D) to adjust the depth of
the trunk support pad.
D
REA BELLIS