Fitting heel straps to the foot plate
Tools: 10 mm fixed spanner
screwdriver
A
B
Tools: 10 mm fixed spanner
screwdriver
18
A
B
Fitting heel straps to the
foot plate extension
Fasten the heel strap guiding pins (A) into the holes
on the foot plate using the screws (B).
Note that only two of the holes are used.
Fit the heel straps around each guiding pin and adjust
the shape and depth, etc. using the velcro straps.
When using the foot plate extension, the heel strap
guiding pins (A) must be secured using the screws
(B) as shown in the diagram.
Note that only two of the holes are used.
A
Fit the heel straps around each guiding pin and adjust
the shape and depth, etc. using the Velcro straps.
B
REA BELLIS