Jøtul Lillehammer Installation And Operation Instructions Manual page 13

Max. 4 ft.
Horizontal
Run
Max. Two
90° Elbows
or One 90°
and Two
45° Elbows
Figure 13. Horizontal Termination with Vertical Rise.
2 1/2”
12 ” 64 mm
305
3”
mm
76 mm
Figure 14. Termination Clearance to overhangs
Wall Thimble
and Trim Collar
Wall Shield Installation
The decorative Wall Shield, included in the Miscellaneous
Hardware bag, is used to obscure the vent hole in the wall
in installations vented directly off the rear of the stove.
Follow this procedure:
1. Remove the top two 1/4" hex head screws from the rear
Max. 15 ft.
Vertical Vent
shroud of the stove.
Run
2. Align the holes in the wall shield with the holes in the
rear shroud.
3. Secure the wall shield to the stove with the two 1/4"
hex head screws. See fig. 15
Figure 15.
Wall Shield installation.
139955-01_ GF 200 DVII MV / Sept. 2019
.
13