Table of Contents
Advertisement
Setting Caller ID Options
There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call
Waiting), and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing talk/flash or spkr. If the phone
rings when AutoTalk is On, simply remove the handset from the base and the phone
automatically answers the call. Or if the handset is not in the base, press any number key,
/tone, or # to answer the call. If you set AutoTalk to Off, you must press talk/flash or
spkr to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 39.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to "
then press select/ch.
3) Press + or - to choose "
Auto Talk
then press select/ch.
4) Press + or - to change the selection.
AutoTalk: "
Auto Talk On
" or "
CIDCW: "
CIDCW On
", "
CW Deluxe On
5) Press select/ch, and you will hear a confirmation tone.
6) Press end to exit.
",
Caller ID Setup
" or "
",
CIDCW
Auto Talk Off
"
" or "
CIDCW Off
"
G E T T I N G S T A R T E D
[ 15 ]
Advertisement
Table of Contents
