Table of Contents
Advertisement
Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
• You cannot make a call
1) Press call id/ . The summary screen appears. The screen shows
from the Caller ID list if
the number of new messages and the total number of messages.
your phone is connected
to a private branch
2) Use the number keypad (2-9 and 0), +, or - to view the Caller ID message list.
exchange (PBX).
3) Press talk/flash or spkr. The displayed phone number
• When a long distance
call has been set, "
"
1
dials automatically.
appears in the display.
From Talk mode
• If a call comes in via a
1) Press talk/flash.
telephone system that
does not offer Caller ID
2) Press call id/ . The summary screen appears.
service, no information
3) View the Caller ID message you want to dial.
is stored.
4) Press select/ch. The displayed phone number will be dialed.
Long Distance calls and Area Code Setting/Cancellation
While the present Caller ID information is displayed, pressing
remove the prefix "
will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming
call information (i.e., Caller ID list), the phone number and name of the party on the
Caller ID list can be stored in memory.
1) When the phone is in the standby mode, while the incoming Caller
ID information is displayed, press
2) Press + or - to choose "
or "
select "
[ 38 ]
C A L L E R I D
" in the display to set the call for a long distance call, or pressing #
1
/RocketDial/ .
Store in PB?
Store in SD?
" (RocketDial location). To cancel Storing,
".
Cancel
Connecting
8002971023
/tone will place or
" (Phonebook locations)
Advertisement
Table of Contents
