Table of Contents
Advertisement
Remote Operation
You can operate your answering system from a remote location using any touch-tone
telephone or the handset.
For your convenience a
Remote access away from home
remote operation card is
You can check, play, or delete messages, even record a new greeting message when you
provided for you to use
while away from home
are away from home. Additionally, you can turn On or Off your answering system from a
(refer to page 67).
remote location.
• You must enter a command within 15 seconds of entering command waiting mode or the answering
• The system will only playback messages for four minutes and then it returns to command waiting mode.
• If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.
• During the remote operation, "
1) Call your telephone number.
2) During the greeting message, press
(See "Setting a Personal Security Code", page 44).
3) The answering system announces the current time and the number of messages stored
in memory. You hear "To play incoming messages, press pound two. For help, press
pound zero". You will hear intermittent beeps.
4) You may select a command from the following chart:
Command Function
#
then
#
then
#
then
#
then
#
then
*For Memo Record and Greeting Message Record function, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the recording,
press
# then 7 or 8.
[ 50 ]
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
system automatically hangs up and returns to standby.
To continue playing your messages, press # then 2 again within 15 seconds.
" appears on the base.
# and enter your PIN code within 2 seconds.
Command Function
1
Repeat a Message
#
then
2
Playing incoming Messages
#
then
3
Skipping a Message
#
then
4
Deleting a Message
#
then
5
Stop Operation
#
then
6
Answering System On
7
Memo Record/Stop *
8
Greeting Message Record/Stop *
9
Answer System Off
0
Help Guidance
Advertisement
Table of Contents
