Setting Caller Id Options - Uniden EXT 1465 Owner's Manual

Setting Caller ID Options

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on
Call Waiting), and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing talk/call wait. If the phone
rings when AutoTalk is On, simply remove the handset from the base and the phone
automatically answers the call. Or if the handset is not on the base, press any number key,
/tone, or # to answer the call. If you set AutoTalk to Off, you must press talk/call wait
*
to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways.
(See page 41.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press menu/mute.
2) Press + or -/ to move the pointer to
"
3) Press + or -/ to choose "
then press select/chan.
4) Press + or -/ to change the selection.
AutoTalk: "
CIDCW: "
5) Press select/chan, and you will hear a confirmation tone.
To complete the setting, make sure to return the handset to the base.
", then press select/chan.
" or "
" or "
", " " or "
",
"
"
G E T T I N G S T A R T E D [ 15 ]