Step 4: Setting Up Caller Id Options - Uniden EXI 7926 Owner's Manual

Step 4
Setting up Caller ID options
There are three Caller ID options available; they are AutoTalk, CIDCW, and Area Code.
AutoTalk allows you to answer the phone without pressing
phone rings when AutoTalk is on, simply remove the handset from the base and the
phone automatically answers the call. If the phone rings when AutoTalk is off, you must
press or
line 1 line 2
CIDCW (Caller ID with Call Waiting) performs the same as regular Caller ID on a call
waiting number. You must subscribe to CIDCW from your phone company to use
this feature.
If you enter your 3-digit area code number in the Area Code option, your local area code
does not appear in Caller ID messages. When reviewing Caller ID messages, you will see
only the local seven digit number. For calls received from outside your local area code, you
will see a full 10-digit number.
To change your Caller ID options:
1
When the phone is in the standby mode, press and hold
Caller ID setting screen appears.
2
Press
up/int'com
•
3
Press . The following screen appears.
sel/vol
4
Press
up/int'com
•
you would like to change. Press the
"Off". Press
Press
sel/vol
5
After you have made your selections, press
the base.
Note If your calling area requires 10-digit dialing do not program this option.
to answer the call. This option is useful for screening calls.
call id dn up delete
hold conf int'com flash
to select "Line 1" or "Line 2".
or
dn /conf
ª
call id dn up delete
hold conf int'com flash
sel/vol chan redial/p
or keys to move the cursor to the selection that
dn /conf
ª
. Use the number keypad to enter or change the area code.
sel/vol
again.
line 1
Caller ID Setup
1 Line 1
2 Line 2
1 Auto Talk:Off
2 CIDCW
3 Area Code:
key to toggle between "On" and
sel/vol
call id/hold
or . If the
line 2
until the
call id/hold
:On
or return the handset to
13