Making A Call From The Base; Making A Call From The Handset; Using The Tone Feature - Uniden EXI 7926 Owner's Manual

Basics
(continued)

Making a call from the base

1
Press line 1 .
2
Dial the number on the keypad, or, use one of
the memory features. (See Using memory
dialing, page 32.)
3
When you finish the call, press

Making a call from the handset

Off-hook dialing
1
Pick up the handset.
2
Press .
line 1
3
Dial the number on the keypad. Or use
one of the memory features. (See Using
memory dialing, page 32.)
4
When you finish the call, press
On-hook dialing
To call a number while the handset is in standby mode, dial the number on the keypad,
or use one of the memory features. Press
page 32.)
Hint AutoStandby automatically hangs up when you place the handset on the
base. These is no need to press
Note If a line is in use, or a phone off the hook, the LCD screen reads
"In Use Line 1".

Using the tone feature

If you are dialing in the pulse mode and need
to enter tone digits, press
the digits. Once the call has ended, tone mode
is canceled and pulse dialing resumes.
Note The tone feature applies only when the base is set to pulse.
to hang up.
line 1
or, return the handset to the base.
line 1
line 1
line 1
then enter
/ /tone
* 0
line 1
conference
mute hold
status
line1
mem
. (See Using memory dialing,
or to hang up.
line 2
tone
0
oper
call id dn
line 2
line2
up delete
17