Using The Page Feature; Traveling Out-Of-Range; Selecting A Different Channel; Adjusting The Volume Controls - Uniden EXI 7926 Owner's Manual

Basics
(continued)

Using the page feature

To locate the handset when it is off the base, press
The handset beeps for 60 seconds. The following screen appears:
Press up/int'com
•
to the base. Press
or
page/int'com
standby.

Traveling out-of-range

As you begin to move too far from the base, you first hear a clicking sound. As you
travel further, the noise increases. If you travel out-of-range, your call terminates.

Selecting a different channel

If you encounter interference while using your
phone, you can manually change the channel
for clearer operation. This function works only
when the phone is use.
The button on the handset allows you
chan
to choose between 40 different channels.
During the course of a conversation, if you hear
static or noise which marks it difficult to hear, press
apears and the phone changes to a different channel.

Adjusting the volume controls

Handset ringer volume
When the phone is in standby mode, press the
sel/vol
key on the handset to set the handset
ringer volume.
Handset earpiece volume
During the conversation mode, press
sel/vol
Each time
volume selection changes.
20
status
memory page/int'com redial/p flash
on the handset to connect
up/int'com
on the handset
•
on the base again to return to
Ringer High
is pressed, the earpiece
page/int'com
call id
hold
chan
Ringer Low
sel/vol
sel/vol .
sel/vol
sel/vol
sel/vol
sel/vol
on the base.
Paging
dn up delete
conf int'com flash
sel/vol chan redial/p
Scanning
. The following screen
sel/vol chan redial/p
Normal
Medium
High
Loud