Transferring Calls; Using The Speakerphone - Uniden EXI 7926 Owner's Manual

2-Line features

Transferring calls

1
To transfer a call from the base or the
handset, press
2
Answer by pressing
On the base the status LED flashes and
line 1 LED turns red.
The following screen appears:
You may then announce the call with the
intercom.
3
To speak to the caller, press
• If no one is available to take the call, return to the caller by pressing
to take a message or complete the call.
line 2

Using the speakerphone

You may use the phone as speakerphone to answer calls by pressing the line 1 or
line 2 button on the base. To hang up, press line 1 or line 2 again.
The base microphone is located under the phone.
Position yourself approximately 12 inches away
from the base and speak clearly.
If the handset is on the base, you may use either
the base keypad or memory dialing to place a call.
(continued)
hold then page/int'com
.
page/int'com
line 1
.
memory page/int'com redial/p
call id
hold
line 1
(Hold)
Line 1
line 2
or .
mute hold
status
flash
dn up delete
conf int'com flash
line 2
conference
mute hold
status
Intercom
or
line 1
12"
25