Data Extraction/Replay; Data Extraction With Live Player V5 - Furuno VR-7000 Instruction Manual

5.

DATA EXTRACTION/REPLAY

5.1

Data Extraction with Live Player V5

Notes on extraction
• Free space of more than 30 GB is required in the C drive of the PC to create a temporary file
for the data extraction.
• The data recording more than 13 hours cannot be extracted at once.
• If "Get size failed" appears at the start of extraction, click the [OK] button to start.
• The message that announces completion of extraction may not appear. If the progress bar
shows 100%, extraction is completed.
• If extraction stops due to an error message or HDD space insufficiency, restart the Live Player
V5 and try the extraction again.
• The Live Player V5 may stop when extraction is cancelled. If this occurs, quit the Live Player
V5 from the Task Manager then restart the Live Player V5.
• Do not extract data to a medium whose remaining space is too low to hold the data. the OS may
not start up if the medium is the system drive and it is full. (Figure 1 GB for one hour of data.)
• Do not connect a storage device to more than one Live Player V5 in extraction or play back.
Extraction or play back may stop. Also, when using the Data Consistency Analyzer, you cannot
connect to the Long Term Device via Live Player V5.
• Recording continues when extracting data from the DCU ([Long Term Device (LAN)]). Newer
data may not be extracted since older data is written over. If this occurs, set the start time for
extraction backward by some hours.
• When extraction is aborted, "[FILE] Do you delete extracted file?" appears. If you want to con-
tinue extracting data, click the [No] button. Select the folder that was created when extraction
started, then click the [Resume] button.
1. Start the Live Player V5.
2. Open the [Tool] menu and select [Source Select] to show the [Source Select] dialog box.
If the Live Player V5 is connected to the data source, click the [Yes] button after selecting
[Source Select].
16