How To Remove The Fixed Dru - Furuno VR-7000 Instruction Manual

2. DATA EXTRACTION FROM FIXED DRU
The signals of the terminal board in the fixed DRU are shown below.
SOCKET 1
SOCKET 6
Terminal board in the fixed DRU (front view)
2. Start the Live Player V5 on the PC to extract the data.
For how to extract the data, see chapter 5. After extracting the data, reconnect the cables.
2.3

How to Remove the Fixed DRU

When the fixed DRU is not damaged, remove the fixed DRU for data extraction as follows:
Note: In an emergency situation, priority must be given to evacuation of personnel. Remove the
fixed DRU only when there is enough time to do so.
1. Turn off the DCU to turn off the fixed DRU.
2. Cut the power and LAN cable connected to the fixed DRU.
3. Removed three bolts (M12) to remove the fixed DRU from the mounting location.
4. Move the fixed DRU to a safe place suitable for data extraction.
See section 2.2 to make connections and extract the data.
Socket number Signal
1
2
3
4
5
6 TD_P
7 TD_N
8 RD_P
9 RD_N
10
Power cable
LAN cable
SOCKET 5
SOCKET 10
Cable
24 V Power cable
24 V No connection
0 V Power cable
0 V No connection
N/C No connection
LAN cable
N/C No connection
Fixed DRU
8