Installation; Installable Pc; How To Install The Live Player V5 And Set Up The Pc - Furuno VR-7000 Instruction Manual

1.

INSTALLATION

The Live Player V5 is a software program that installs in a PC, and functions to monitor and play-
back the data collected in the VR-7000/7000S's DRU, Long Term Device of the Data Collecting
Unit (DCU). Install the Live Player V5 in a PC using the program CD (supplied).
1.1

Installable PC

The Live Player V5 is compatible with the OS (Operating System) shown below. The OS language
should be English or Japanese. The Live Player V5 may not operate properly on the PC with other
OS and language.
®
• Windows 10 (64 bit)
Required specifications for replay PC
• CPU: Pentium 350 MHz (or equivalent) or higher
• RAM: Minimum 1 GB
• HDD: Minimum 250 GB
• Screen resolution: XGA or higher (More than SXGA (1280x1024) recommended)
• CD-ROM drive (internal or external)
• LAN port
• USB port (2.0 compatible)
®
• DirectX 9.0c or higher
®
• Java (If there is no Java
from the Internet.)
®
• Microsoft Visual C++
Note: Before you connect a PC to the VDR, set the IP address and subnet mask on the PC (see
section 1.2).
1.2 How to Install the Live Player V5 and Set Up the
PC
The software program for the Live Player V5 is included in the program CD. Follow the appropriate
procedure, depending on your OS. The procedure is comprised of the following two steps.
• Install the software.
• Set the IP address and subnet mask of the PC.
Note: The Live Player V5 version 1.20 or later is not compatible with version 1.10 or earlier. There-
fore, the program CD has install programs for both latest version and version 1.10. If the Live Play-
er V5 version 1.10 or earlier has been installed in your PC, uninstall the Live Player V5 before
installing.
®
• Windows 8.1 (32 bit, 64 bit)
®
in the PC, download and install the latest Java
®
2005 SP1 (x86) or later
• Windows
1
®
7 (32 bit, 64 bit)
®
program