Furuno VR-7000 Instruction Manual page 18

3. DATA EXTRACTION FROM FLOAT-FREE DRU
4) Enter the username and password.
• [Username]: admin
• [Passward]: Contact your dealer.
5) Select [Networking] and [Network Configuration] from the menu at the left of the display.
6) Select [Network Interfaces].
7) Select [eth0].
8) Change the IP address ([IPv4 address]) to "10.0.0.151", then click the [Save] button.
9) Select [usb0].
10)Change the IP address ([IPv4 address]) to "10.0.0.150", then click the [Save and Apply]
button.
11)Wait three minutes, then open the [Control Panel].
12)Select [Network and Internet] and [Network Connections].
13)Change the IP address of "RNDIS/Ethernet Gadget" to "10.0.0.1".
5. Start the Live Player V5 on the PC to extract the data.
For how to extract the data, see chapter 5. After extracting the data, reconnect the cables.
14