Furuno VR-7000 Instruction Manual page 17

3) Remove the storage board.
Note: Do not remove the SSD board from the storage board.
2. Using a A/Micro B USB cable, connect the storage board to the PC.
3. Install the USB-LAN driver as follows:
1) Open [Device Manager] on the PC.
2) Double-click [Other Device] and [RNDIS/Ethernet Gadget].
3) Click the [Update Driver Software...].
4) Select [Browse my computer for driver software], then click the [Next] button.
5) Select [Let me pick from a list of device drivers on my computer], then click the [Next] but-
ton.
6) Select [Network adapters] from the [Common hardware types:] list, then click the [Next]
button.
7) Select [Microsoft] from the [Manufacturer] list, and select [Remote NDIS Compatible De-
vice] from the [Network Adapter:] list.
8) Click the [Next] button.
9) After the confirmation message appears, install the driver software.
10) After completing the installation, click the [Close] button.
4. The Live Player V5 on the PC accesses the storage module whose IP address is "10.0.0.150".
To connect the storage board to the PC with a USB cable and extract the data, change the IP
address of the USB port on the storage board to "10.0.0.150" as follows:
1) Open the [Control Panel], then select [Network and Internet] and [Network Connections].
2) Change the IP address of "RNDIS/Ethernet Gadget" to "10.199.199.1".
3) Start the Internet Explorer
3. DATA EXTRACTION FROM FLOAT-FREE DRU
®
on the PC and access to the "http://10.199.199.99:10000".
13
SSD board
Micro USB port
Storage board
10.199.199.99.